• Bartec junction box for use in ATEX zones.
• Enables cable lengths of ATEX appliances to be extended.
• Two Exe cable glands fitted.
• GRP enclosure.
• 80 x 75 x 55mm.
Junction box for use in ATEX zones to extend the cable length of EHSAFE heaters and other ATEX appliances, where potientially hazardous gases may be present. For ATEX Zones 1/2/21/22. Contains two pairs of 2.5mm² rising clamp terminals for each cable with a partition plate in-between, two earth terminals, mounted on DIN rail. Two M20 cable glands are pre-fitted. Supplied with relevant certification and installation instructions.
Explosion protection: II 2G Ex eb IIC T5 Gb / II 2D Ex tb IIIC.
Certificate: PTB 08 ATEX 1064.
Ambient temperature range: -50°C to +55°C.
Enclosure material: GB80 Black GRP.
IP rating: IP66.
Terminals: 4 x AKZ 4 (portioned 2+2).
Earthing: 2 x AKE 4 terminals.
Cable entry: M20 x 2 for cables 7 to 13mm dia.
Cable glands: M20 Exe GRP.