• Soft-start prevents nuisance tripping and prolongs element life.
• Low-cost.
• Easy to install.
• Can be installed indoors or out.
The Infresco-S 4kW is part of a family of controllers designed to provide energy saving when used with quartz halogen infrared heaters or other heating and lighting products. The ‘S’ soft-starts the load either automatically, when power is applied to the unit, or by the use of a remote switch (e.g. CC3 Time Programmer). Incorporates zero-voltage switching and a soft-start function to eliminate inrush current - potentially increasing heater element life by up to 30% and preventing nuisance-tripping on heavily loaded circuits. Installation of the unit is simple, and once installed is maintenance-free. The soft-start circuit is initialised each time power is supplied to the unit. Alternatively, a remote switch or heater time programmer can be added using terminals (INPUT COM) on the PCB. (in normal mode the terminals are fitted with a link, this will need to be removed and switch wires fitted).
Electrical supply: 230Vac ± 10% 50 Hz.
Supply fusing: 20LCT or MCB20A (1pole, 440V) recommended or equiv.
Switching capacity: 4kW max.
Quiescent power consumption (control circuit): 50mA.
Power and load terminals: 2.5mm2 rising clamp.
Operating temperature range: -20 to 40°C.
Protection Rating: IP65.
Cable entry glands: 2 x 10mm dia max.
: 1 x 7mm dia max.
Enclosure Dimensions: 120 x 50 x 112 mm (wdh)
