CUT YOUR HEATING COSTS

With gas and oil prices at an all time high, switching to SunSwitch Quartz Halogen could reduce your energy bills substantially. Quartz Halogen electric heating uses up to 60% less energy than other building heating methods. Now is the time to make the switch.
+ More info

Need more information?
Try these topics:
Why Quartz Halogen Infra Red
Zone heating
Outstanding comfort
Dust & splashproof heaters

Weatherproof (IP65) passive infra-red detector with integral temperature sensor and soft-start circuit for use with quartz halogen heaters. The Infresco P saves energy by enabling heating only if a) someone is present in the detection zone, and b) the ambient temperature is below a pre-set level. The 'on' time can be pre-set from 5 to 30 minutes, and the temperature setpoint can be at 0°C to 40°C (factory set 20°C). Electronically controlled soft start prevents inductive current surge at switch on, reducing the risk of nuisance tripping at the MCB, and extending element life by powering up heater elements gently. Can be ceiling or wall-mounted.

Features
• Energy-saving presence and temperature activated controller
• Detection range 7 metres (100° angle)
• 5 -30 minute 'on' time
• Adjustable temperature setpoint
• Integral soft start
• Simple to install
• Weatherproof (IP65)

Specifications

Electrical supply: 230V ac 50 Hz single phase
Maximum load 4kW/6kW at 20°C ambient
Operating temperature -20°C to 40°C
IP rating 65
Cable glands accept cables up to 2.5mm2 (line & load)

* intended for professional installation