![]() |
|
|||||||||||||||||||||||||
|
|
|||
|
|
Low-cost infra red heater. Featuring an advanced 1.3 kW clip-replaceable element in a compact wall-mounted enclosure, VarmaSPOT is supplied with a tilt-and-swivel adjustable mounting bracket for easy positioning, 5m cable, mains plug and full installation instructions. On-off button on side. Don't be put off by the budget price tag - this is a fine heater. Rec. mounting height: 2.1-2.5m |
||
| VarmaSPOT 1.3kW | Internet Direct £113.04 +vat (£130.00) |
+ buy |
|||
| price includes UK mainland delivery | |||||
|
Term2000 Heat and Light! |
|||
|
|
A stylish and elegant Philips-powered quartz halogen heater with two individually adjustable halogen spotlights which can be swivelled to any angle. Lights and heating can be switched and controlled separately, making this combination a perfect integrated solution . Power:
|
||
| Heat & Light combo 2.1kW | Internet Direct £235.00 + vat (£270.25) |
+ buy |
|||
| prices include UK mainland delivery | |||||
|
VOLTAGE REGULATORS SunSwitch voltage regulators allow the output from quartz halogen heaters to be adjusted for comfort and economy. When turned down, the regulators also reduce energy consumption and extend element life which, in the long run, more than offsets the purchase price. Regulators are simple to install, with just neutral live and earth inputs, and connections to the heater/s (intended for professional installation only).
|
|||||||||||||
|
|
CC1
Comfort controller + soft start
The CC1 Comfort Controller enables the heat output from up to 3kW of SunSwitch infra red heaters to be manually adjusted for complete comfort control, while also providing a soft-start to maximise element life. One CC1 will control up to two 1.3kW Weathersafe heaters. These are strongly recommended where heaters are installed beneath awnings. The advanced phase angle circuit has been specially developed for quartz halogen heaters. When turned down, the CC1 also reduces energy consumption which, in the long run, more than offsets the purchase price. The CC1 is extremely simple to install with just neutral, live and earth inputs, and connections to the heater/s. * for professional installation only. Electrical supply 200-264Vac
50-60 Hz 1ph
|
||||||||||||
|
PASSIVE INFRA RED DETECTORS Recommended for rooms or areas that are only used intermittently, and where there is a chance of heaters being left on. Ideal for smoking shelters.
|
|||||||||||||
|
|
Weatherproof 16A 230V passive infra red movement detector for use with quartz halogen heaters. Ideal wherever heat is needed only intermittently. 12m range. 180 degree detection area. Adjustable time delay. Larger loads and 3 phase loads can be switched via a suitably rated contactor. Mounting - wall
or other flat vertical surface
|
||||||||||||
| |