Contract Quality heating products for your restaurant terrace/pub garden

This versatile, weatherproof electric heater can be used anywhere you want - indoors in your conservatory - or outside in your garden. It's elegant enough for interior use in a restaurant, yet it has an IP65 ingress protection rating so it can be used with confidence outdoors all year round. The gold infrared element is highly energy-efficient and very, very powerful. Check it out - this heater is outstanding quality for the money. It even comes pre-fitted with a 5m cable and plug!

Features
• High heat output glassless design with integral grille
• Fully weatherproof to IP65
• Can be mounted horizontally or vertically
• Long life gold element with neutral light output
• Optically designed twin parabolic reflector for maximum heat output
• Supplied with tilt-adjustable bracket
• 5m cable and UK plug included.

Specifications
Rec. mounting height: 2.2-3.0m
Throw: 4.0-5.0m
Spread: 4.0-4.5m
Dimensions: 67 x 17 x 10cm (wdh)
Weight: 5.0kg
Electrical supply: 230V ac 50 Hz single phase
Insulation: Class 1
Element life: 5000 hours (nom.)

The compact Heliosa 11 1.5kW heater is ideally suited to all outdoor applications, but it is particularly suitable for use under parasols, awnings and other canopies. The Sunbrero makes a superb inexpensive wall-mounted heater, but it is also supplied with a bracket for easy attachment to parasol spars. Heliosa 11 features a special vibration resistant element which can operate at any angle. In most cases, parasols can be closed down with the heaters in situ, once they have cooled down. Four heaters will allow each quadrant of a rectangular parasol to be heated to perfection. Heliosa 11 is IPX5 rated which makes it safe for year round outdoor use in all weather conditions.

Specifications
Rec. mounting height: 2.1 - 2.5m
Rec. mounting angle: 45°
Throw: 3.00 - 4.00m
Spread: 3.0 - 4.0m

Enclosure: Aluminium cast, powder coated white with optically designed parabolic reflector. Stainless-steel safety grille included.
Electrical supply 230V ac 50 Hz; Power consumption 1.5kW; Insulation Class 1; Environmental protection IP65 (dust and splash proof); Element life 5000 hours nominal; Dimensions 44 x 19 x 12cm; Weight 2kg; Cable 1.5m silicon insulator heat resistant to 180°C.

The big Varma 'Seaside' heater with its stainless-steel enclosure and protective ROBAX glass front is ideal for outdoor use in coastal areas The Seaside Patio Heater has a 2kW long-life gold element and an unusually large reflector which delivers an excellent heat output. Adjustable mounting bracket, cable and plug.

Rec. mounting height: 2.2 - 3.0m
Rec. mounting angle: 45°
Throw: 4.0-5.0mm
Spread: 4.0-4.5m
Protection: IP23

Electrical supply 230V ac 50 Hz; Power consumption 1.3kW; Insulation Class 1; Environmental protection IP54 (dust and splash proof); Element life 3500 hours nominal; Dimensions 47.5x24x18 cm (whd); Weight 4kg. CE approved.

This elegant GIRAFFA Patio Heater is ideal for terraces, decking and garden lawns. Fully portable, it can also be bolted down. So you can have SunSwitch Weathersafe™radiant infrared warmth wherever and whenever you want. The swivel head allows heat to be directed precisely. The Giraffa is heavy and inherently stable, and the open framework provides good wind resistance. Supplied with Heliosa 11 1.5kW heater. Try growing plants up it! Posh and portable, gas patio heaters could never look this elegant . . .

Heavy gauge steel frame, powder-coated grey, with tie bars in bright finish lacquered steel. Stainless steel allen-bolts.
Height 2.2m
Supplied flat packed with assembly instructions and allen key.

+ See bigger picture

Easily installed heavy duty clamp for SunSwitch patio heaters. Heavy duty design. Fits in seconds to round or rectangular section poles, posts, pergolas, balcony railings, garden fence posts etc.

Weatherproof 16A Passive infra red movement detector for use with quartz halogen infrared heaters. Ideal for pub garden smoking shelters or wherever heat is needed only intermittently.

Mounting - wall or other flat vertical surface
Output adjustment - 0-100%
Sensing range -12m max with 180° detection area
Time delay - 5 seconds to 5 minutes (adjustable preset)
Switching capacity - 16A 230V (larger loads require a contactor)
Supply voltage - 230V ac 1ph
Dimensions - 65 x 83 x 115mm (hwd)
Protection - IP44

Weatherproof 20A electronic push-button timer for use with quartz halogen patio heaters. Ideal for smoking shelters or where heat is needed only intermittently. 4.5 kW capacty.

- No retriggering of switch while timer is active
- Rugged tamper resistant enclosure
- LED 'on' status indicator

Mounting - wall or other flat vertical surface
Time adjustment - 10-150 minutes
Switching capacity - 20A 230V
Supply voltage - 230V ac 1ph
Dimensions - 95 x 120 x 35mm (hwd)
Protection - IP54

The CC1 Comfort Controller enables the heat output from up to 3kW of SunSwitch infrared heaters to be manually adjusted for complete comfort control, while also providing a soft-start to maximise element life. One CC1 will control up to two 1.3kW Weathersafe heaters. Thee CC1 is strongly recommended where heaters are installed beneath awnings. The advanced phase angle circuit has been specially developed for quartz halogen heaters. When turned down, the CC1 also reduces energy consumption which, in the long run, more than offsets the purchase price. The CC1 is extremely simple to install with just neutral, live and earth inputs, and connections to the heater/s.

* for professional installation only.

Electrical supply 200-264Vac 50-60 Hz 1ph
Max current rating 17A @ 25°C ambient - 13A @ 30°C ambient
Conformity EN55011 Class A and EN55022 Class A.
(unit not weatherproof).